GPS Active Antenna Splitter 1X4
The ALDCBS1X4 GPS Amplified Splitter is a one input, four output device with a 17dB min. gain block. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness
Click Here To Download:
•Datasheet: GPS Active Antenna Splitter 1X4
The ALDCBS1X4 GPS Amplified Splitter is a one input, four output device with a 17dB min. gain block. The frequency response covers the GPS L1 & L2 bands with excellent gain flatness. In the normal configuration, one of the splitter RF outputs (J1) passes DC from the connected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter amplifier. The other RF outputs (J2, J3, J4) are DC loaded with a 200 Ohm resistor to simulate the antenna current draw.
Features
- Amplifier Gain of 17dB
Gain = 17dB - Extremely Flat Group Delay
Less that 1ns variation - Phase Matched Outputs
Phase (J1 – J2) < 1.0o
Click Here To Download:
•Datasheet: GPS Active Antenna Splitter 1X4