Tactical And Strategic Communication Antennas
Whether
you need compact antennas for man-pack tactical communications or larger units
for higher data rate mobile or fixed ground terminals, Atlantic has proven to be
the industry's most innovative and dependable source.
Products are AS9100 certified.
COM201B Lightweight VHF Communications Antenna
The
COM201B is a vertically polarized, omni-directional antenna specifically
designed for quick deployment and ease of operation. The COM201B has the
versatility to be deployed in several different applications:
Ground
mounted by using a unique tripod leg structure.
Mast
mounted on the following masts by using our optional mast adapter:
o
OE-254
o
QEAM®
o
Contact
Corporation® telescopic Cobham masts.
Tower
mounted.
Datasheet: COM201B Lightweight VHF Communications Antenna
COM209 UHF Base Mount Antennas
The COM209 is a vertically polarized, omnidirectional dipole antenna specifically designed for ground-to-air and point-to-point communications. Frequency coverage is from 225-400 MHz without external tuning. VSWR is typically less than 1.5:1. Peak gain is at the horizon with a typical value of 1.5 dBi.
Click Here To Download:
Datasheet: COM209 UHF Base Mount Antenna
COM212 VHF & UHF Communications Antennas
The COM212 is a base mounted, broadband, dipole antenna that provides vertically polarized, omnidirectional coverage over the 30 - 88 MHz frequency band for power levels to 800 watts.
The elevation pattern of the antenna is a figure eight with maximum signal intensity along the horizon and a half-power beamwidth of 80o. The inherent balance dipole design and broadband impedance characteristics make the performance of this antenna relatively insensitive to its mounting environment.
Click Here To Download:
Datasheet: COM212 VHF & UHF Communications Antennas
COM228 Stacked VHF Communications Antenna
The COM228 is a stacked, two port omnidirectional antenna specifically designed for quick deployment and ease of operation. The antenna is mounted in a stacked configuration for maximum isolation and covers the 30-88 MHz band without external tuning.
Click Here To Download:Datasheet: COM 228 Stacked VHF Communications Antenna
COM229 Dual Stacked UHF Antenna
The Model COM229 is a general purpose communications antenna. It is specifically designed for multichannel use when two UHF (225-450 MHz) channels are to be used simultaneously.
Dual UHF dipole radiators are enclosed in a single housing, providing independent, broadband, vertically polarized coverage. Use of this antenna in multichannel communications systems can substantially reduce the total space requirements and significantly improve overall system performance.
Click Here To Download:
Datasheet: COM229 Dual Stacked UHF Antenna
COM231 Vehicular Mount VHF Communications Antenna
The COM231 is a vertically polarized, omni-directional antenna specifically designed to meet rigorous, environmental and mechanical conditions encountered in a military environment. It provides VHF communications for a range of military vehicles and can be used with any radio that operates within its 30-88 MHz frequency.
Datasheet: COM231 Vehicular Mount VHF Communications Antenna
COM232 UHF Base Mount Antenna
The COM232 is a vertically polarized, omni-directional, low power dipole antenna specifically designed for ground-to-air and point-to-point communications. The COM232 is designed with an integral base mount with recessed RF connector for ease of installation. Frequency coverage is from 225-450 MHz without external tuning. Peak radiation response is provided at the horizon with a minimum gain of 2 dBi. Connector adapters can be purchased separately.
Click Here To Download:Datasheet: COM232 UHF Base Mount Antenna
COM237 Series Communication Antenna
The COM237 is a two port, vertically polarized, omni-directional antenna designed to meet the rigorous environmental and mechanical requirements of the US Military. The COM237 is capable of mounting on the OE-254, QEAM® and Contact Corporation® telescopic Cobham masts by using our optional mast adapter. The antenna radiates an omni-directional pattern in the azimuth plane and a figure eight pattern in the elevation plane. Maximum power is directed toward the horizon.
Datasheet: COM237 Series Communication Antenna
COM242 Series - Vehicle Mount & Ground/Mast Mount Antenna
The COM242 series antennas are vertically polarized, omni-directional three (3) port tactical communications antennas for the VHF, UHF and EPLRS bands. This antenna meets the rigorous mechanical and environmental requirements of the US military. Designed for 100 Watts of CW power, the COM242 has a typical VSWR of 2.0:1 at the input connectors. The antenna radiates an omni-directional pattern in the azimuth plane and a figure eight pattern in the elevation plane. Maximum power is directed towards the horizon.
Click Here To Download:
Datasheet: COM242 Series - Vehicle Mount & Ground/Mast Mount Antenna
COM243 Series Tri-Band Vehicle Mount Antenna
The COM243 antenna is a vertically polarized, omni-directional three-port tactical vehicle mounted communications antenna for the VHF, UHF and L bands. This antenna meets the rigorous mechanical and environmental requirements of the US military. Designed for 100 watts of CW power, the COM243 has a typical VSWR of 3.0:1 at the input connectors. The antenna radiates an omni-directional pattern in the azimuth plane and a figure eight pattern in the elevation plane.
Click Here To Download:Datasheet: COM243 Series Tri-Band Vehicle Mount Antenna
EMM336 Vehicle Mount Antenna
The EMM336 is a vertically polarized, omnidirectional antenna specifically designed to meet the rigorous environmental conditions encountered in a military environment. It provides wideband electronic counter measures for a range of military vehicles and can be used with ECM equipment that operates in the 20-6000 MHz frequency.
Click Here To Download:
Datasheet: EMM336 Vehicle Mount Antenna